The RC-1 Bi-Color Remote Controller from NanLite is a multi-function wireless control accessory that is especially valuable for adjusting lights that are positioned at a distance or hung overhead. The remote can adjust color temperature, brightness from 0 to 100%, hard and soft quality of light, and DMX channel assignment on one or multiple lights. The remote is compatible with NanLite Forza, PavoTube, Luxpad Soft Panels, Value Series, and Pro Series LED panels.

NanLite RGB Remote control

• Draadloze afstandsbediening
• Traploze dimmer
• Voor CN 600/900/1200 series

• Afstandsbediening met kabel
• Traploze dimmer
• Voor CN 600/900/1200 series

Designed to wirelessly control multiple lights in the Nanlite line, the NANLINK Transmitter Box is a 2400 MHz battery-driven unit that allows you to charge it while running on AC power. Bottom 1/4″-20 threads, a side belt clip, and a ring integrated into the chassis offer different ways to mount it. The included padded case has a belt loop and a carabiner clip. The NANLINK Transmitter Box is compatible with PavoTube II X-Series, PavoTube 30C and 15C, PavoTube II 6C, Forza 500, 300, 300B, 200, 150, 60, and 60B, MixPanel 150 and 60, FS 300, 200, and 150, LumiPad 25 and 11, Compac 200, and more.
Wireless Control
Wirelessly control lights with the NANLINK mobile app regardless of whether they have built-in Bluetooth. Any Nanlite fixture with built-in 2.4 GHz is compatible with the NANLINK, including the PavoTube 30C and 15C, Forza 500, MixPanel 150 and 60, and others. The NANLINK mobile app gives you deep control over color temperature, HSI, and effects, and it lets you easily create repeatable scenes and presets and control lights in groups.

Multiple Power Options
With a built-in 2400 MHz battery, the NANLINK Transmitter Box can run for 10 hours. The integrated USB Type-C port allows you to add future firmware updates, but it also lets you power the device in the field with a USB power bank battery. You can also use this port to connect the NANLINK directly to an AC outlet to run continuously while charging the internal battery.

Compact and Easy to Mount
The NANLINK was designed to be as compact and lightweight as possible while providing all-day battery life and a robust control signal. An internal antenna system helps it perform and keeps the size to a minimum. A bottom 1/4″-20 thread, side belt-clip, and ring integrated into the chassis give you many ways to mount it. The included padded case even has a belt loop and carabiner clip.

Compatible with Many Lights
The NANLINK is fully compatible with the PavoTube II X-Series, PavoTube 30C and 15C, PavoTube II 6C, Forza 500, 300, 300B, 200, 150, 60, and 60B, MixPanel 150 and 60, FS 300, 200, and 150, LumiPad 25 and 11, Compac 200, and more.

Bresser WT-3i Canon Triggerset voor FM
Bresser WT-3i Triggerset is compatible met Canon EOS DSLR camera's. Met de geavanceerde zender kunnen tot 198 (2 x 99) verschillende flitsers aangestuurd en ingesteld worden. Ideaal dus voor het gebruik bij verschillende opstellingen. De zenderunit past op de flitsschoen van de camera. De ontvanger wordt door middel van een USB aansluiting aangesloten op de flitser. De kit bestaat uit één zender en één USB-ontvanger. De kit bevat één afstandsbediening zender eenheid en één USB-ontvanger.

This new control device allows you to wirelessly control all LEDGO fixtures equipped with 2.4G WiFi or DMX. Up to 32 devices can be connected. You can use two LG-A30s to achieve a Master-Slave mode, which solves the problem of signal shielding caused by being in different spaces.

Key Features
Control all aspects of LEDGO fixtures, including special effects
Supports WiFi 2.4G and legacy 5-pin DMX connectivity
Powered by DC or one Sony NP-F battery
100m transmission range
Supports up to 32x simultaneious smart devices
Mounts on wall screw or stand with 1/4″-20 thread